Pentium Pro Processor Demo 2/Intel Pentium Pro Processor Demo CD 2.iso/ppro_ws2/trispect.ins/data.z/eyeshape.dll/string.txt

Text File | 1995-10-16 | 9KB | 171 lines

10    Shape Properties
11    Face Properties
12    No Bevel
13    Round
14    Inverted Round
15    Flat
16    All Intersection Edges
17    Length
18    Height
19    Width
20    Diagonal
21    Diagonal2
22    Directional Light Properties
23    Text  Properties
24    Model Properties
25    Page Properties
26    Bevel Properties
27    Imported Shape Properties
28    IntelliShape Properties
29    Cross-Section Properties
30    IntelliShape Properties
31    IntelliShape Properties
32    IntelliShape Properties
33    Facet  Model Properties
34    Spot Light Properties
35    Annotation Properties
36    Style Properties
37    Style Properties
38    Group Properties
39    Embedded Page Properties
40    2D Shape Properties
41    Embedded Object Properties
42    Surface Style Properties
43    Unable to create shape:\nCross-section for loft shape is empty, or contains outlines that overlap or are not closed..\nDefault shape will be used instead.
44    Unable to create shape:\nPath for loft shape is invalid.\nDefault shape will be used instead.
45    Unable to create shape:\nPath for loft shape is invalid.\nDefault shape will be used instead.
46    Unable to create shape:\nPath for loft shape is invalid.\nDefault shape will be used instead.
47    Unable to create shape:\nLoft path contains more than one line or curve.\nDefault shape will be used instead.
48    Unable to create shape:\nLoft shape cross-sections may not all contain the same number of  internal outlines\nor there are fewer than two active cross-sections.\nDefault shape will be used instead.
49    Unable to create shape:\nSome adjacent cross-sections in loft shape are coplanar.\nDefault shape will be used instead.
50    Unable to create shape:\nAutomatic splitting of loft shape cross-sections failed.\nDefault shape will be used instead.
51    Unable to create shape:\nLoft shape cross-sections may not all contain the same number of  internal outlines.\nDefault shape will be used instead.
52    Unable to create shape:\nOutlines matched between loft cross-sections have unequal number of curves.\nDefault shape will be used instead.
53    Unable to create shape:\nLoft cross-section contains invalid curves.\nDefault shape will be used instead.
54    Cannot open OBJ material file
55    3D Studio (*.3ds)|*.3ds|AutoCAD DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|POV-Ray 2.x (*.pov)|*.pov
56    |Raw triangles (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0  (*.wrl)|*.wrl||
57    No facet data found in file\n(often means import file filter incorrect)
58    Group code not found on line
59    Group value not found on line
60    Mesh resolution is greater than\nnumber of vertices available on line
61    Incorrect polyface vertex index encountered on line
62    Degenerate polygon(s) first detected on line
63    Binary DXF files currently cannot be read;\nplease use text (ascii) DXF files instead.
64    Unable to satisfy all SmartDimension values at once.
65    Cannot open file
66    Embedded Scene Properties
67    All models|*.prj;*.3ds;*.dxf;*.obj;*.raw;*.stl;*.wrl|3D Studio (*.3ds)|*.prj;*.3ds|Autocad DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|Raw triangles (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0 (*.wrl)|*.wrl|All files|*.*||
68    There is no 3D surface data to export; no file created.
69    Unknown 3D file suffix; operation cancelled
70    3D file suffix and filter type selected do not match. Continue?
71    Premature end of file - operation cancelled
72    Lookat direction cannot be all zeros
73    Up direction cannot be all zeros
74    Lookat and Up directions cannot be parallel
75    Bad magic number for 3D Studio file.\nRead cancelled
76    Mesh has multiple face arrays.\nAdditional array ignored at location
77    No points found in mesh object.\nRead cancelled at location
78    No faces found in mesh object at location
79    Not enough data at line
80    Bad number of outlines at line
81    Bad number of indices at line
82    Bad vertex index at line
83    Too many vertices in face (limit of three) at line
84    One or more input polygons have no area.\nDiscarded first at line
85    Surface does not define a solid.\nStereolithography should not be attempted.
86    Unexpected data at line
87    Bad coordinate index value at line
88    Bad normal index value at line
89    Cannot tessellate one or more polygons.\nDiscarded data!
90    Nonzero attribute found - cancelled read at location
91    One or more input polygons have no area.\nDiscarded first at location
92    Vertex index too high at location
93    Color value out of bounds at location
94    Material component found,\nbut no material created yet on line
95    Duplicate material name found on line
96    Material file not found on line
97    Some of the surfaces of this model have individual surface styles.
98    Do you want the dropped style to replace the individual surface styles?
99    Imported Shape Properties
100    IGES Model Properties
101    IntelliShape Properties
2000    Start Section Edges
2001    End Section Edges
2003    Side Section Edges
2004    Shelling Edges
2005    All Edges
2006    Start Section
2007    End Section
2008    Side
3001    3D Studio (*.3ds)|*.3ds|AutoCAD DXF (*.dxf)|*.dxf
3002    |Raw triangles (*.raw)|*.raw|VRML 1.0  (*.wrl)|*.wrl||
3003    All models|*.prj;*.3ds;*.dxf;*.raw;*.wrl|3D Studio (*.3ds)|*.prj;*.3ds|Autocad DXF (*.dxf)|*.dxf|Raw triangles (*.raw)|*.raw|VRML 1.0 (*.wrl)|*.wrl|All files|*.*||
9000    All models|*.prj;*.3ds;*.dff;*.dxf;*.obj;*.raw;*.stl;*.wrl|3D Studio (*.3ds)|*.prj;*.3ds|DFF (*.dff)|*.dff|Autocad DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|Raw  (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0 (*.wrl)|*.wrl|All files|*.*||
9001    3D Studio (*.3ds)|*.3ds|DFF (*.dff)|*.dff|AutoCAD DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|POV-Ray 2.x (*.pov)|*.pov
9002    |Raw triangles (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0  (*.wrl)|*.wrl||
9003    Unable to create shape:\nLoft shape contains fewer than two active cross-sections.\nDefault shape will be used instead.
9004    Unable to create shape:\nLoft cross-section is empty or contains outlines that overlap or are not closed.\nDefault shape will be used instead
9005    Unable to create shape:\nLoft cross-section contains outlines that are not closed..\nDefault shape will be used instead.
9006    Unable to create shape:\nMultiple outlines in loft cross-section must be enclosed by a single outline.\nDefault shape will be used instead.
9007    Unable to create shape:\nAll loft cross-sections do not contain the same number of outlines.\nDefault shape will be used instead.
9008    Unable to create shape:\nSome outlines in loft cross-section have become invalid due to resizing.\nDefault shape will be used instead.
32772    Finish the current shape
32773    Cancel profile edit
32969    Move profile
32973    Popup properties of cross sections
32996    Bevel selected edges using blend or chamfer\nBevel Edges
33068    Edit the properties of the shape.
33069    Edit the style properties for selected object\nStyle Properties
33080    Set drawing mode for dragging endpoints by first defining angle, then distance\nAngle-Distance Drag Mode"
33089    Position lines and curves by offseting from existing geometry\nOffset 2D drawing mode
37002    Select a path
37004    Replace with an arc
37005    Replace with a bezier
37006    Replace with a line
37007    Split the curve
37009    Edit path
37014    Edit the cross section
37015    Edit text
37016    Edit handle value
37017    Toggle the light on and off.
37018    Toggle the light property for casting shadows.
37019    Apply this shape last in the sequence of shapes
37022    Show all cross sections
37025    Insert new lost section
37030    Evaluate the last model regeneration
37032    Cruise to current position.
37033    Copy to current position.
37034    Link to current position.
37036    Edit the SmartDimension value.
37037    Edit all SmartDimensions.
37038    Split the selected curve into two curves
37039    Set the distance between grid lines for this shape
37040    Select points that will connect one cross-section to the next
37041    Add a SmartDimension.
37042    Delete the SmartDmension.
37047    Compute physical body and surface properties of the shape.
37049    Select this entire outline
37050    Edits curve values\nEdit Curve
37051    Edit the numerical parameters for the selected line or curve
37052    Display the horizontal (screen-based) distance.
37053    Display the vertical (screen-based) distance.
37054    Select this entire outline
37055    Select an outline
37056    Edit embedded page in place.
37058    Open application and edit embedded object.
37059    Open application of embedded object.
37060    Check whether the underlying model data is valid
37061    Translate anchor or attachment point along axes of point.
37062    Rotate anchor or attachment point along up direction.
37065    Flip Anchor along up direction.
37066    Flip Attachment point along up direction.
37067    TriBall positions shape but not anchor
37068    TriBall positions shape and anchor
37069    Snap to 2D drawing grid
37070    Snap to 2D geometry during drawing
37071    Snap to angle increments during 2D drawing
37072    Snap to distance increments during 2D drawing
37073    Show snap and measurement feedback when using the 2D drawing tools
57632    Delete Shape.